Bullet-Resistant Hollow Metal Door and Frame – Half Lite
- Ballistic rating
- UL 752 Levels 1–10
- Door
- Hollow metal, steel faces
- Vision panel
- Glazed upper half
- Supply
- Factory-hung with frame
A factory-hung steel door and armoured frame with bullet-resistant glazing in the upper half, rated from UL 752 Level 1 to Level 10.
- Supply and project support across Saudi Arabia
- Engineered configurations and documentation
Overview
Bullet-resistant glazing in the upper half gives a view at standing height, while the solid lower half keeps the door practical in busy corridors and offices. The door and its armoured frame are supplied as one factory-hung assembly, rated from UL 752 Level 1 up to Level 10.
Ballistic protection
The protection level is chosen to match the threat assessed for the site, anywhere from UL 752 Level 1 to Level 10. The door is designed to trap rounds rather than deflect them, which cuts the risk of ricochet and of rounds passing sideways through the edge. The frame carries ballistic armour in its face, so protection continues past the edge of the leaf. The vision panel is glazed to the same level as the door.
Construction
Cold-rolled steel faces with channel-reinforced edges enclose fibreglass ballistic armour and an insulated core. The frame is formed and welded to size from 16 gauge steel as standard, with 14 or 12 gauge for heavier-duty openings. A full-height gear hinge carries the leaf, and the door is prepared for a cylinder lock, mortise lockset or exit device.
Sizes, finishes and supply
The standard size is 84 × 36 in (2,134 × 914 mm), with heights from 80 to 108 in and widths from 32 to 48 in. Leaves are 1¾ in or 2 in thick. Doors are supplied primed for painting on site or in stainless steel, and arrive hung in their frames for a faster, more reliable installation.

Specifications
| Manufacturer | Vantor Protection |
|---|---|
| Product type | Bullet-resistant door and frame assembly |
| Material | Hollow Metal |
| Configuration | Half Lite |
| Ballistic rating | UL 752 Levels 1–10 (level confirmed per project) |
| Door leaf | Cold-rolled steel faces, channel-reinforced edges, fibreglass ballistic armour and an insulated core |
| Vision panel | Bullet-resistant glazing in the upper half of the leaf |
| Glazing options | Glass-polycarbonate composite, glass-clad polycarbonate, multi-ply polycarbonate or acrylic-polycarbonate composite |
| Frame | Cold-rolled steel, formed and welded to size, with ballistic armour in the 2 in (51 mm) frame face |
| Frame gauge | 16 ga steel as standard; 14 ga or 12 ga on request |
| Hinge | Heavy-duty full-height gear hinge, clear anodised aluminium |
| Hardware preparation | Cylinder lock, mortise lockset or exit device |
| Operation | Swing door, supplied hung in its frame |
| Height | 84 in (2,134 mm) standard; 80–108 in (2,032–2,743 mm) |
| Width | 36 in (914 mm) standard; 32–48 in (813–1,219 mm) |
| Leaf thickness | 1¾ in (44 mm) or 2 in (51 mm) |
| Finish | Primed for painting on site, or stainless steel |
| Use | Interior |
Ballistic levels and sizes shown are the available range. The protection level, configuration and certification for each opening are confirmed for each project.
Features
- Traps roundsBuilt to hold rounds rather than deflect them, reducing ricochet and side penetration
- Armoured frameBallistic armour in the frame face, so the edges are protected too
- Ballistic vision panelFour glazing types, matched to the door’s protection level
- Factory-hungArrives hung in its frame for quicker, more reliable installation
- Hardware-readyPrepared for cylinder, mortise lock or exit device
- Made to sizeHeights 80–108 in and widths 32–48 in
Applications
- Government and municipal buildings
- Courthouses and police stations
- Banks and cash-handling rooms
- Data centres and control rooms
- Schools and universities
- Safe rooms and executive suites
Documentation and Support
Project documentation for the Bullet-Resistant Hollow Metal Door and Frame – Half Lite is issued on request so that you always receive the current revision for your configuration.
- Technical data sheetRequest
- Shop drawings and CAD filesRequest
- Installation instructionsRequest
- Three-part specificationRequest
- Ballistic test certification (UL 752)Request
Technical support
Our team supports product selection, site surveys, specification, supply coordination and installation planning across Saudi Arabia.
