Bullet-Resistant Hollow Metal Door and Frame – Full Lite

Bullet-Resistant Doors Designed and manufactured by Vantor
Ballistic rating
UL 752 Levels 1–10
Door
Hollow metal, steel faces
Vision panel
Large glazed panel
Supply
Factory-hung with frame

A factory-hung steel door and armoured frame with a large bullet-resistant vision panel, rated from UL 752 Level 1 to Level 10 for protected openings that still need clear sight lines.

  • Supply and project support across Saudi Arabia
  • Engineered configurations and documentation
01

Overview

Most of the leaf is bullet-resistant glazing, so staff keep a clear view across lobbies, receptions and control rooms while the opening stays protected. The door and its armoured frame are supplied as one factory-hung assembly, rated from UL 752 Level 1 up to Level 10.

Ballistic protection

The protection level is chosen to match the threat assessed for the site, anywhere from UL 752 Level 1 to Level 10. The door is designed to trap rounds rather than deflect them, which cuts the risk of ricochet and of rounds passing sideways through the edge. The frame carries ballistic armour in its face, so protection continues past the edge of the leaf. The vision panel is glazed to the same level as the door.

Construction

Cold-rolled steel faces with channel-reinforced edges enclose fibreglass ballistic armour and an insulated core. The frame is formed and welded to size from 16 gauge steel as standard, with 14 or 12 gauge for heavier-duty openings. A full-height gear hinge carries the leaf, and the door is prepared for a cylinder lock, mortise lockset or exit device.

Sizes, finishes and supply

The standard size is 84 × 36 in (2,134 × 914 mm), with heights from 80 to 108 in and widths from 32 to 48 in. Leaves are 1¾ in or 2 in thick. Doors are supplied primed for painting on site or in stainless steel, and arrive hung in their frames for a faster, more reliable installation.

Bullet-Resistant Hollow Metal Door and Frame – Full Lite – visualisation
Bullet-Resistant Hollow Metal Door and Frame – Full Lite
02

Specifications

ManufacturerVantor Protection
Product typeBullet-resistant door and frame assembly
MaterialHollow Metal
ConfigurationFull Lite
Ballistic ratingUL 752 Levels 1–10 (level confirmed per project)
Door leafCold-rolled steel faces, channel-reinforced edges, fibreglass ballistic armour and an insulated core
Vision panelLarge bullet-resistant vision panel over most of the leaf
Glazing optionsGlass-polycarbonate composite, glass-clad polycarbonate, multi-ply polycarbonate or acrylic-polycarbonate composite
FrameCold-rolled steel, formed and welded to size, with ballistic armour in the 2 in (51 mm) frame face
Frame gauge16 ga steel as standard; 14 ga or 12 ga on request
HingeHeavy-duty full-height gear hinge, clear anodised aluminium
Hardware preparationCylinder lock, mortise lockset or exit device
OperationSwing door, supplied hung in its frame
Height84 in (2,134 mm) standard; 80–108 in (2,032–2,743 mm)
Width36 in (914 mm) standard; 32–48 in (813–1,219 mm)
Leaf thickness1¾ in (44 mm) or 2 in (51 mm)
FinishPrimed for painting on site, or stainless steel
UseInterior

Ballistic levels and sizes shown are the available range. The protection level, configuration and certification for each opening are confirmed for each project.

03

Features

  • Traps roundsBuilt to hold rounds rather than deflect them, reducing ricochet and side penetration
  • Armoured frameBallistic armour in the frame face, so the edges are protected too
  • Ballistic vision panelFour glazing types, matched to the door’s protection level
  • Factory-hungArrives hung in its frame for quicker, more reliable installation
  • Hardware-readyPrepared for cylinder, mortise lock or exit device
  • Made to sizeHeights 80–108 in and widths 32–48 in
04

Applications

  • Government and municipal buildings
  • Courthouses and police stations
  • Banks and cash-handling rooms
  • Data centres and control rooms
  • Schools and universities
  • Safe rooms and executive suites
05

Documentation and Support

Project documentation for the Bullet-Resistant Hollow Metal Door and Frame – Full Lite is issued on request so that you always receive the current revision for your configuration.

Technical support

Our team supports product selection, site surveys, specification, supply coordination and installation planning across Saudi Arabia.